First-principle study of Cu-, Ag-, and Au-decorated Si-doped carbon quantum dots (Si@CQD) for CO2 gas sensing efficacies.

CONTEXT: Nanosensor materials for the trapping and sensing of CO2 gas in the ecosystem were investigated herein to elucidate the adsorption, sensibility, selectivity, conductivity, and reactivity of silicon-doped carbon quantum dot (Si@CQD) decorated with Ag, Au, and Cu metals. The gas was studied in two configurations on its O and C sites. When the metal-decorated Si@CQD interacted with the CO2 gas on the C adsorption site of the gas, there was a decrease in all the interactions with the lowest energy gap of 1.084 eV observed in CO2_C_Cu_Si@CQD followed by CO2_C_Au_Si@CQD which recorded a slightly higher energy gap of 1.094 eV, while CO2_C_Ag_Si@CQD had an energy gap of 2.109 eV. On the O adsorption sites, a decrease was observed in CO2_O_Au_Si@CQD which had the least energy gap of 1.140 eV, whereas there was a significant increase after adsorption in CO2_O_Ag_Si@CQD and CO2_O_Cu_Si@CQD with calculated ∆E values of 2.942 eV and 3.015 eV respectively. The adsorption energy alongside the basis set supposition error (BSSE) estimation reveals that CO2_C_Au_Si@CQD, CO2_C_Ag_Si@CQD, and CO2_C_Cu_Si@CQD were weakly adsorbed, while chemisorption was present in the CO2_O_Ag_Si@CQD, CO2_O_Cu_Si@CQD, and CO2_O_Au_Si@CQD interactions. Indeed, the adsorption of CO2 on the different metal-decorated quantum dots affects the Fermi level (Ef) and the work function (Φ) of each of the decorated carbon quantum dots owed to their low Ef values and high ∆Φ% which shows that they can be a prospective work function-based sensor material. METHODS: Electronic structure theory method based on first-principle density functional theory (DFT) computation at the B3LYP-GD3(BJ)/Def2-SVP level of theory was utilized through the use of the Gaussian 16 and GaussView 6.0.16 software packages. Post-processing computational code such as multi-wavefunction was employed for result analysis and visualization.

Transition Metal-Decorated B12N12-X (X = Au, Cu, Ni, Os, Pt, and Zn) Nanoclusters as Biosensors for Carboplatin.

Theoretical studies on the adsorption, sensibility, and reactivity of a boron nitride nanocage decorated with Au, Cu, Ni, Os, Pt, and Zn metals as a biosensor material were carried out for the adsorption of carboplatin by applying the density functional theory computation at the B3LYP-GD3BJ/def2svp level of theory. All the optimized structures, as well as the calculations as regards the studied objective including electronic properties, geometry optimization parameters, adsorption energy studies, natural bond orbital analysis, topology studies, sensor mechanistic parameters, and thermodynamic properties (ΔG and ΔH), were investigated herein. As a result, the noticeable change in the energy gap of the studied surfaces when interacting with carboplatin accounted for the surfaces' reactivity, stability, conductivity, work function, and overall adsorption ability, implying that the studied decorated surfaces are good sensor materials for sensing carboplatin. Furthermore, the negative adsorption energies obtained for interacting surfaces decorated with Cu, Ni, Os, and Zn suggest that the surface has a superior ability to sense carboplatin as chemisorption was seen. Substantially, the geometric short adsorption bond length after adsorption, thermodynamically spontaneous reactions, and acceptable sensor mechanism results demonstrate that the investigated surfaces have strong sensing characteristics for sensing carboplatin.

Therapeutic Potential of B12N12-X (X = Au, Os, and Pt) Nanostructured as Effective Fluorouracil (5Fu) Drug Delivery Materials.

In view of the research-substantiated comparative efficiency of nontoxic and bioavailable nanomaterials synergic with human systems for drug delivery, this work was aimed at studying the comparative efficiency of transition metal (Au, Os, and Pt)-decorated B12N12 nanocages in the adsorption of fluorouracil (5Fu), an antimetabolite-classed anticarcinogen administered for cancers of the breast, colon, rectum, and cervix. Three different metal-decorated nanocages interacted with 5Fu drug at the oxygen (O) and fluorine (F) sites, resulting in six adsorbent-adsorbate systems whose reactivity and sensitivity were investigated using density functional theory computation at the B3LYP/def2TZVP level of theory with special emphasis on the structural geometry, electronic, and topology analysis as well as the thermodynamic properties of the systems. While the electronic studies predicted Os@F as having the lowest and most favorable Egp and Ead of 1.3306 eV and -11.9 kcal/mol, respectively, the thermodynamic evaluation showed Pt@F to have the most favorable thermal energy (E), heat capacity (Cp), and entropy (ΔS) values as well as negative ΔH and ΔG while the adsorption studies showed that the greatest degree of chemisorption with Ead magnitude of -204.5023 kcal/mol was observed in energies ranging from -12.0 to 138.4 kcal/mol with Os@F and Au@F at the lower and upper borders. The quantum theory of atoms in molecules results show that the six systems had noncovalent interactions as well as a certain degree of partial covalency but none showed covalent interaction while the noncovalent interaction analysis corroborated this by showing that the six systems had favorable interactions, though of varying degrees, with very little trace of steric hindrance or electrostatic interactions. Overall, the study showed that notwithstanding the good performance of the six adsorbent systems considered, the Pt@F and Os@F showed the most favorable potential for the delivery of 5Fu.

Investigation on the molecular, electronic and spectroscopic properties of rosmarinic acid: an intuition from an experimental and computational perspective.

Various drugs such as corticosteroids, salbutamol, and ß2 agonist are available for the treatment of asthma an inflammatory disease and its symptoms, although the ingredient and the mode of action of these drugs are not clearly elucidated. Hence this research aimed at carrying out improved scientific research with respect to the use of natural product rosmarinic acid which poses minima, side effects. Herein, we first carried out extraction, isolation, and spectroscopic (FT-IR, 1H-NMR and 13C-NMR) investigation, followed by molecular modeling analysis on the naturally occurring rosmarinic acid extracted from Rosmarinus officinalis. A detailed comparison of the experimental and theoretical vibrational analysis has been carried out using five DFT functionals: BHANDH, HSEH1PBE, M06-2X, MPW3PBE and THCTHHYB with the basis set 6-311++G (d, p) to investigate into the structural, reactivity, and stability of the isolated compound. Frontier molecular orbital analysis and appropriate quantum descriptors were calculated. Results showed that the compound was more stable at M06-2X and more reactive at HSEH1PBE with an energy gap of 6.43441 eV and 3.8047 eV, respectively, which was later affirmed by the global quantum reactivity parameters. From natural bond orbital analysis, π* →π* is the major contributor to electron transition with the summation perturbation energy of 889.57 kcal/mol, while π →π* had the perturbation energy totaling of 145.3 kcal/mol. Geometry analysis shows BHANDH to have lower bond length values and lesser deviation from 120° in carbon-carbon angle. The potency of the title molecule as an asthma drug was tested via a molecular docking approach and the binding score of -8.2 kcal/mol was observed against -7.0 of salbutamol standard drug, suggesting romarinic acid as a potential natural organic treatment for asthma.Communicated by Ramaswamy H. Sarma.

B- and Al-Doped Porous 2D Covalent Organic Frameworks as Nanocarriers for Biguanides and Metformin Drugs.

Nanostructures such as nanosheets, nanotubes, nanocages, and fullerenes have been extensively studied as potential candidates in various fields since the advancement of nanoscience. Herein, the interaction between biguanides (BGN) and metformin (MET) on the modified covalent organic framework (COF), COF-B, and COF-Al was investigated using density functional theory at the ωB97XD/6-311+G (d, p) level of computation to explore a new drug delivery system. The electronic properties evaluation reveals that the studied surfaces are suited for the delivery of both drug molecules. The calculated adsorption energies and basis set superposition errors (BSSE) ranged between -21.20 and -65.86 kJ/mol. The negative values obtained are an indication of excellent interaction between the drug molecules and the COF surfaces. Moreover, BGN is better adsorbed on COF-B with Eads of -65.86 kJ/mol, while MET is better adsorbed on COF-Al with Eads = -47.30 kJ/mol. The analysis of the quantum theory of atom in molecules (QTAIM) explained the nature and strength of intermolecular interaction existing between the drug molecules BGN and MET with the adsorbing surfaces. The analysis of noncovalent interaction (NCI) shows a weak hydrogen-bond interaction. Other properties such as quantum chemical descriptors and natural bond orbital (NBO) analysis also agree with the potential of COF surfaces as drug delivery systems. The electron localization function (ELF) is discussed, and it confirms the transitions occurring in the NBO analysis of the complexes. In conclusion, COF-B and COF-Al are suitable candidates for the effective delivery of BGN and MET.

Computational design and molecular modeling of the interaction of nicotinic acid hydrazide nickel-based complexes with H2S gas.

The application of nickel complexes of nicotinic acid hydrazide ligand as a potential gas-sensor and adsorbent material for H2S gas was examined using appropriate density functional theory (DFT) calculations with the ωB97XD/Gen/6-311++G(d,p)/LanL2DZ method. The FT-IR spectrum of the synthesized ligand exhibited a medium band at 3178 cm-1 attributed to ν(NH) stretching vibrations and strong bands at 1657 and 1600 cm-1 corresponding to the presence of ν(C[double bond, length as m-dash]O) and ν(C[double bond, length as m-dash]N) vibration modes. In the spectrum of the nickel(ii) complex, the ν(C[double bond, length as m-dash]O) and ν(C[double bond, length as m-dash]N) vibration bands experience negative shifts to 1605 cm-1 and 1580 cm-1, respectively, compared to the ligand. This indicates the coordination of the carbonyl oxygen and the azomethine nitrogen atoms to the Ni2+ ion. Thus, the sensing mechanism of the complexes indicated a short recovery time and that the work function value increases for all complexes, necessitating an excellent H2S gas sensor material. Thus, a profound assertion was given that the complex sensor surfaces exhibited very dense stability with regards to their relevant binding energies corresponding to various existing studies.

Detection of Carbon, Sulfur, and Nitrogen Dioxide Pollutants with a 2D Ca12O12 Nanostructured Material.

In recent times, nanomaterials have been applied for the detection and sensing of toxic gases in the environment owing to their large surface-to-volume ratio and efficiency. CO2 is a toxic gas that is associated with causing global warming, while SO2 and NO2 are also characterized as nonbenign gases in the sense that when inhaled, they increase the rate of respiratory infections. Therefore, there is an explicit reason to develop efficient nanosensors for monitoring and sensing of these gases in the environment. Herein, we performed quantum chemical simulation on a Ca12O12 nanocage as an efficient nanosensor for sensing and monitoring of these gases (CO2, SO2, NO2) by employing high-level density functional theory modeling at the B3LYP-GD3(BJ)/6-311+G(d,p) level of theory. The results obtained from our studies revealed that the adsorption of CO2 and SO2 on the Ca12O12 nanocage with adsorption energies of -2.01 and -5.85 eV, respectively, is chemisorption in nature, while that of NO2 possessing an adsorption energy of -0.69 eV is related to physisorption. Moreover, frontier molecular orbital (FMO), global reactivity descriptors, and noncovalent interaction (NCI) analysis revealed that the adsorption of CO2 and SO2 on the Ca12O12 nanocage is stable adsorption, while that of NO2 is unstable adsorption. Thus, we can infer that the Ca12O12 nanocage is more efficient as a nanosensor in sensing CO2 and SO2 gases than in sensing NO2 gas.

Heteroatoms (Si, B, N, and P) doped 2D monolayer MoS2 for NH3 gas detection.

2D transition metal dichalcogenide MoS2 monolayer quantum dots (MoS2-QD) and their doped boron (B@MoS2-QD), nitrogen (N@MoS2-QD), phosphorus (P@MoS2-QD), and silicon (Si@MoS2-QD) surfaces have been theoretically investigated using density functional theory (DFT) computation to understand their mechanistic sensing ability, such as conductivity, selectivity, and sensitivity toward NH3 gas. The results from electronic properties showed that P@MoS2-QD had the lowest energy gap, which indicated an increase in electrical conductivity and better adsorption behavior. By carrying out comparative adsorption studies using m062-X, ωB97XD, B3LYP, and PBE0 methods at the 6-311G++(d,p) level of theory, the most negative values were observed from ωB97XD for the P@MoS2-QD surface, signifying the preferred chemisorption surface for NH3 detection. The mechanistic studies provided in this study also indicate that the P@MoS2-QD dopant is a promising sensing material for monitoring ammonia gas in the real world. We hope this research work will provide informative knowledge for experimental researchers to realize the potential of MoS2 dopants, specifically the P@MoS2-QD surface, as a promising candidate for sensors to detect gas.

Meta-Hybrid Density Functional Theory Prediction of the Reactivity, Stability, and IGM of Azepane, Oxepane, Thiepane, and Halogenated Cycloheptane.

The application of plain cycloalkanes and heterocyclic derivatives in the synthesis of valuable natural products and pharmacologically active intermediates has increased tremendously in recent times with much attention being paid to the lower cycloalkane members. The structural and molecular properties of higher seven-membered and nonaromatic heterocyclic derivatives are less known despite their stable nature and vast application; thus, an insight into their structural and electronic properties is still needed. Appropriate quantum chemical calculations utilizing the ab initio (MP2) method, meta-hybrid (M06-2X) functional, and long-range-separated functionals (ωB97XD) have been utilized in this work to investigate the structural reactivity, stability, and behavior of substituents on cycloheptane (CHP) and its derivatives: azepane, oxepane, thiepane, fluorocycloheptane (FCHP), bromocycloheptane (BrCHP), and chlorocycloheptane (ClCHP). Molecular global reactivity descriptors such as Fukui function, frontier molecular orbitals (FMOs), and molecular electrostatic potential were computed and compared with lower members. The results of two population methods CHELPG and Atomic Dipole Corrected Hirshfeld Charges (ADCH) were equally compared to scrutinize the charge distribution in the molecules. The susceptibility of intramolecular interactions between the substituents and cycloalkane ring is revealed by natural bond orbital analysis and intramolecular weak interactions by the independent gradient model (IGM). Other properties such as atomic density of states, intrinsic bond strength index (IBSI), and dipole moments are considered. It is acclaimed that the strain effect is a major determinant effect in the energy balance of cyclic molecules; thus, the ring strain energies and validation of spectroscopic specificities with reference to the X-ray crystallographic data are also considered.

Investigation on electronic structure, vibrational spectra, NBO analysis, and molecular docking studies of aflatoxins and selected emerging mycotoxins against wild-type androgen receptor.

The geometry, frontier molecular orbitals (FMOs), vibrational, NBO analysis, and molecular docking simulations of aflatoxins (B1, B2, M1, M2, G1, G2), zearalenone (ZEA) emodin (EMO), alternariol (AOH), alternariol monoethyl ether (AMME), and tenuazonic acid (TeA) mycotoxins have been extensively theoretically studied and discussed based on quantum density functional theory calculations using Gaussian 16 software package. The theoretical computation for the geometry optimization, NBOs, and the molecular docking interaction was conducted using Density Functional Theory with B3LYP/6-31+G(d,p), NBO program, and AutoDock Vina tools respectively. Charge delocalization patterns and second-order perturbation energies of the most interacting natural bond orbitals (NBOs) of these mycotoxins have also been computed and predicted. Interestingly, among the mycotoxins investigated, aflatoxin G1 is seen to give the strongest stabilization energy while Zearalenone shows the highest tendency to accept electron(s) and emodin, an emerging mycotoxin gave the best binding pose within the androgen receptor pocket with a mean binding affinity of -7.40 kcal/mol.

Synthesis, characterization, and theoretical studies of the photovoltaic properties of novel reactive azonitrobenzaldehyde derivatives.

All dyes conduct but at different degrees of absorption; it is interesting to study the degree of conductivity and absorptivity of novel reactive azo-dyes in respect to dye-sensitized solar cells (DSSCs) to ascertain their viability for such applications. In this study, four novel reactive azo-dyes were experimentally synthesized from p-aminobenzaldehyde, 4-amino-3-nitrobenzaldehyde, and aniline through series of condensation and coupling reactions. The various functional groups, molecular connectivities, and molecular weight of the various fragments of the synthesized dyes were elucidated using the GC-MS, FT-IR, UV-vis, and NMR respectively. The experimentally determined structures were modeled and investigated using density functional theory (DFT) and time-dependent density functional theory (TD-DFT) approaches to computationally compute the electronic structure properties, reactivity, absorption and solvatochromism in four different phases: gas, ethanol, acetone, and water, and the photovoltaic properties for possible applications in dye-sensitized solar cells (DSSCs). By comparing the HOMO (E H) and the LUMO (E L) energies from the results obtained demonstrates that dye D has the highest E L energy value of -2.48 eV with a relatively lowest E H energy value of -5.63 eV such that it lies underneath the conduction band edge of TiO2 which is necessary to enable charge regeneration. Pi-electron delocalization was observed from the natural bond orbital (NBO) calculations between the different aromatic rings with dye B and A having the relatively highest and least second-order stabilization energies between σ* → σ* and LP* → LP interacting orbitals respectively. It is also observed in all the solvents that the Gibbs free energy of injection (ΔG inject) is greater than 0.2 eV and hence, all the studied azo structures in the four phases provided efficient electron injection and light harvesting efficiency (LHE), however, the value of ΔG inject for dyes B and D is greatest in all the four phases and thus, provided the highest electron injection of all the dyes. From the fact-findings of quantum theory of atoms-in-molecules (QTAIM), dyes A and C have extra-stability due to their relatively high numbers of intramolecular H-bond interactions along with some additional intra-atomic bonding between atoms within the studied compounds. Hence, all the four dyes are good for DSSCs applications.